Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 53)

XR100 Series Programming Guide Digital Monitoring Products

AreA InformAtIon

17.18

COMMON NO YES

Common Area

Select YES to enable this area to operate as a common area. This area is armed

whenthelastareainthesystemisarmedandisdisarmedwhentherstareain

the system is disarmed. You can have multiple common areas in each system. For

the common area to work properly, do not assign the common area to any user

code. When a user code can arm and disarm the common area from a keypad at

any time, the common area does not function as a common area.

17.19

ARM FIRST NO YES

Arm First Area

Select YES to enable this area to operate as an Arm First area. This area is

automaticallyarmedwhenanynon-ArmFirstareaassignedtothesamekeypad

is armed but does not disarm when other areas become disarmed. Assign areas to

keypads using the Display Areas option in Device Setup programming. You can have

multiple Arm First areas in a system and divide them among keypads if needed. If

an Arm First area has faulted zones that cannot be bypassed, arming stops and the

areas are not armed. Correct the problem with the Arm First area and then begin

the arming process again. Default value is NO.

Note: The Arm First automatic arming only occurs when arming from a keypad.

Arming from a zone, schedule, or remotely is not affected and Arm First areas do

not automatically arm.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 77 78

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 53