Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 40)

Digital Monitoring Products XR100 Series Programming Guide

Bell OptiOns

Bell Options

10.1

BELL OPTIONS

Bell Options

This section allows you to program the panel bell output functions.

10.2

BELL CUTOFF: 15

Bell Cutoff Time

Enterthemaximumtimefrom1to99minutestheBellOutputremainson.Ifthe

areaisdisarmed,thecutofftimeresets.Enter0(zero)toprovidecontinuousbell

output. The default is 15 minutes.

Note: For SIA CP-01 False Alarm Reduction Installations, the Bell Cutoff Time

must be set to a minimum of six (6) minutes.

10.3

BELL TST NO YES

Automatic Bell Test

SelectYEStoturnontheBellOutputfor2secondseachtimethesystem is

com pletely armed from a keypad. This test is delayed until the Closing Wait

acknowledgeisreceived(ifprogrammed).IftheClosingWaitacknowledgeisnot

receivedwithin90seconds,thebelltestdoesnotoccur.Armingperformedfroman

ArmingzoneorfromRemoteLink™doesnotactivatetheBellTest.

10.4

BELL OUTPUT: 0

Bell Output

EntertheoutputnumberwhenneededtofollowthepanelBellOutputoperation

forallactionandoffconditions.Enter0(zero)todisable.

Note:WhenBELLACTIONissettoTforTemporalCode3,theBellOutputactionfor

anLX-Busoutputispulse.

Note:BellOutputshouldnotbeprogrammedforaModel1135WirelessSirenwhen

programmed in Output Information to Trip with Panel Bell.

10.5

BELL ACTION . . . . .

Bell Action

ThissectiondenesthetypeofBellOutputforzonealarms.PressCOMMANDto

display the default Bell Output for each zone type. Press any Select key and enter

SforaSteadyBellOutput,PforaPulsedoutput,TforaTemporalCode3output,

and N for no Bell Output.

Note: Trouble conditions do not activate the Bell Output.

10.5.1

FIRE TYPE: P

Fire Bell Action

DenesBellActionforFireTypezones.ThedefaultisP.

10.5.2

BURGLARY TYPE: S

Burglary Bell Action

DenesBellActionforBurglaryTypezonesandExitErroroutput.Thedefaultisset

at S.

10.5.3

SUPRVSRY TYPE: N

Supervisory Bell Action

DenesBellActionforSupervisoryTypezones.ThedefaultissetatN.

10.5.4

PANIC TYPE: N

Panic Bell Action

DenesBellActionforPanicTypezones.ThedefaultissetatN.

10.5.5

EMERGNCY TYPE: N

Emergency Bell Action

DenesBellActionforEmergencyTypezones.ThedefaultissetatN.

10.5.6

AUXLRY 1 TYPE: N

Auxiliary 1 Bell Action

DenesBellActionforAuxiliary1Typezones.ThedefaultissetatN.

10.5.7

AUXLRY 2 TYPE: N

Auxiliary 2 Bell Action

DenesBellActionforAuxiliary2Typezones.ThedefaultissetatN.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 40

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadian XR100