Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 42)

Digital Monitoring Products XR100 Series Programming Guide

Output OptiOns

11.6

PANIC ALM OUT: 0

Panic Alarm Output

EntertheoutputnumbertoturnonwhenanyPanictypezoneisplacedinanalarm

condition. The output is turned off after all Panic zones are restored from an alarm

conditionandaSensorResetisperformed.Enter0(zero)todisable.

Wireless Outputs

•ThePanicAlarmiscompatiblewiththeModel1118WirelessRemoteIndicator

LightandtheModel1116WirelessRelayOutputconnectedtoaModel572

IndicatorLED.

•WhenaPanicAlarmoccurs,theLEDturnsonsteadyforveminutesandthen

turns off.

•WhenaPanicTestisinitiatedfromthekeypad,theLEDashesquicklyforve

minutes.

•ForaPanicAlarm,afastresponsewirelessoutputnumberisrecommended.

11.7

AMBUSH OUT: 0

Ambush Output

EntertheoutputnumbertoturnonwhenanAmbushcodeisenteredatakeypad.

TheoutputisturnedoffusingtheSensorResetoption.Enter0(zero)todisable.

11.8

ENTRY OUT: 0

Entry Output

Entertheoutputnumbertoturnonatthestartoftheentrydelaytime.Theoutput

turnsoffwhentheareaisdisarmedortheentrydelaytimeexpires.Enter0(zero)

to disable.

11.9

EXIT OUT: 0

Exit Output

Entertheoutputnumbertoturnonwhenanexitdelaytimestartsinanyareaof

the system. The output turns off when the area arms or when the arming has been

stopped.Enter0(zero)todisable.

11.10

READY OUT: 0

Ready Output

Entertheoutputnumbertoturnonwhenalldisarmedburglaryzonesareina

normal state. The output is turned off when any disarmed burglary type zone is in

abadstate.Enter0(zero)todisable.ThisoutputisnotcompatiblewithCutoff

Outputs.

11.11

PH TRBL OUT: 0

Telephone Trouble Output

Entertheoutputnumbertoturnonwhenthephonelinemonitoronthepanel

phonelineislost.Enter0(zero)todisablethisoutput.

11.12

LATE CLS OUT: 0

Late To Close Output

EntertheoutputnumbertoturnonattheexpirationofaClosingschedule.The

outputactivatessimultaneouslywiththeCLOSINGTIME!keypaddisplay.Theoutput

is turned off when the area is armed, the Closing is extended, or the schedule is

changed.Enter0(zero)todisablethisoutput.

11.13

DVC FAIL OUT: 0

Device Fail Output

Entertheoutputnumbertoturnonwhenanaddresseddevicefailstorespondto

polling from the panel. A Missing Device report is sent to the receiver. The output is

turned off when the device responds to polling or is removed from programming in

thesystem.Enter0(zero)todisablethisoutputandLX-Bus™devicefailreporting

to the receiver. If any addressed device is unsupervised, this output cannot be

used.

11.14

SNSR RST OUT: 0

Sensor Reset Output

EntertheoutputnumbertoturnonwhenaSensorResetisperformedatakeypad.

The output turns off automatically 5 seconds later. This function can be used to

reset smoke detectors that are operated by an external power supply through a

Model716OutputExpanderModule.Enter0(zero)todisablethisoutput.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 42

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadian XR100