Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 30

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 78
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 29
Digital Monitoring Products XR100 Series Programming Guide
22
Remote options
6.18.15 No Communication with Panel
Thisoptiondenestherelayactionwhencommunicationwiththepanelhasnot
occurredforveseconds.PressanytoprowSelectkeytodisplayrelayactionoptions.
PresstheBackArrowkeytoreturntotheNOOFUSERCODEDIGITS:.
Choose the action required:
 PresstherstSelectkeytochooseOFF[Default](RelayAlwaysOff)—Therelaydoes
notturnonwhenanyWiegandstringisreceived.OffdoesnotaffectanyREXoperation.
PressthesecondSelectkeytochooseSITE(AcceptSiteCode)—Dooraccessisgranted
whentheWiegandsitecodestringreceivedmatchesanysitecodeprogrammedatSITE
CODEENTRY.FordetailsreferbacktotheREQUIRESITECODEoption.
PressthethirdSelectkeytochooseANY(AnyWiegandRead)—Dooraccessisgranted
when any Wiegand string is received.
PressthefourthSelectkeytochooseON(RelayAlwaysOn)—Therelayisalwayson.
Press the COMMAND key to display the next action.
PresstherstSelectkeytochooseLAST(KeepLastState)—Therelayremainsinthe
same state and does not change when communication is lost.
Afterchoosingtheaction,theNOCOMMWITHPNLoptionandthenewlydenedaction
display.
Programmingisnowcomplete.PresstheCOMMANDkeytodisplayDEVICENO.
granted
when any Wiegand string is received.
Remote Options
7.1
REMOTE OPTIONS
Remote Options
ThissectionallowsyoutoentertheinformationneededforRemoteCommand/
Remote Programming operation.
7.2
RMT KEY:
Remote Key
Thisoptionallowsyoutoenteracodeofupto16digitsforuseinverifying
theauthorityofanalarmorservicereceivertoperformaremotecommand/
programmingsession.TheRemoteLink™programmustgivethecorrectkeytothe
panel before being allowed any remote functions. All panels are shipped from the
factory with the key preset as blank.
To enter a remote key or change the current one, press a top row Select key and
enteranycombinationofupto16digits.PressCOMMAND.Thecurrentkeydisplay
as astericks.
7.3 Remote Disarm
YESallowsthepaneltobedisarmedremotely.NOdisablesremotedisarming.
Default is NO.
7.4
ARMED ANSWER
Armed Answer Rings
Enterthenumberofringsthepanelcountsbeforeansweringthephonelinewhen
allsystemareasarearmed.Anynumberfrom0to15canbeentered.If0(zero)is
entered, the panel does not answer the phone when all system areas are armed.
ThedefaultArmedRingsis8(eight).
Answering machine bypass procedure:Enteringanumbergreaterthan0(zero)
into either Armed Rings or Disarmed Rings, allows a central station operator to
connect remotely with the panel.
How it works: The operator calls the panel, allows the telephone to ring one
time, and then hangs up. The panel stores this as an attempt to communicate. The
operatorthencallsbackwithin30seconds.Thepanelseizesthetelephonelineto
allow remote programming.
Note: This feature does not interfere with the normal operation of the Arm Rings or
Disarm Rings functions.
7.5
DISARMED ANSWER
Disarmed Answer Rings
Enterthenumberofringsthepanelcountsbeforeansweringthephonelinewhile
anysystemareasaredisarmed.Anynumberfrom0to15canbeentered.If0(zero)
is entered, the panel does not answer the phone when any system area is disarmed.
ThedefaultnumberofDisarmedRingsis8(eight).
NO COMM WITH PNL
OFF SITE ANY ON
NO COMM WITH PNL
OFF
NO COMM WITH PNL
LAST
NO COMM WITH PNL
SITE
NO COMM WITH PNL
ANY
NO COMM WITH PNL
ON
REMOTE DISARM?
NO YES
RINGS: 8
RINGS: 8
Przeglądanie stron 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag