Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 26)

Digital Monitoring Products XR100 Series Programming Guide

Device Setup

•DoorOn/OffMenuoperationisallowedfordevicesthathaveamatchingarea(s)

asdenedinDeviceAccessAreas

Note:Theprevioususeractionsalsorequirethematchingarea(s)beprogrammed

inUserProle:Arm/Disarmarea(s).

Status Display Allowed

Whenanarea(s)ischosen,thefollowingdisplaysareallowed:

•ArmedStatusoftheselectedarea(s)

•ZoneAlarmsandtroublesforburglary(NT,DY,EX,A1,A2)typezonesassigned

totheselectedarea(s)

•LatetoClosestatusoftheselectedarea(s)

•ZoneStatus(normal/fault)ofzonesthatareassignedtotheselectedarea(s)

Options and Actions Not Affected

ThefollowingoptionsarenotaffectedbytheDisplayAreasoperation.TheUser

Code authority level controls access to these items.

•SensorResetMenu •OutputsOn/OffMenu •SystemStatusMenu

•SystemTest/PanicTest •UserProles •ForgiveAnti-Passback

•ServiceRequest •SetSystemTimeandDate

•FireDrill •DisplayEvents

•24-hourzonesdisplayatkeypadsbasedonStatusListprogrammingonly

Note:Acommonareaanditsoperationscannotbeassignedtoaspecickeypad.

DisplayAreasexample:WhenDevice1hasDisplayAreassetto3,5,and8,it

annunciates troubles and alarms only for zones assigned to those areas.

When

arming/disarmingfromDevice1,onlyareas3,5,and8maybearmed/disarmed,even

whentheUserProlehasauthoritytoarm/disarmothersystemareas.

Exception:DisarmingofotherareasnotselectedinDisplayAreascanbe

accomplished by presenting a card that has disarming authority and matching

proleareaswithareasassignedinDeviceAccessAreas.

6.10

STRIKE TIME: 5

Strike Time

This option displays if DOOR is selected as Device Type.

Enteradooraccesstime,between1and250seconds,duringwhichakeypadoraccess

control device relay is activated. Magnetic locks or electric door strikes are connected

to the relay and released for the length of the strike time. Default is 5 seconds.

Enter0(zero)toactivatethedevicerelaywithatoggleaction.Thisallowstheuser

to activate or deactivate the device relay each time a valid user code is entered.

The device relay is activated or deactivated until a user code is entered again.

Note:TheRequesttoExitdooraccesstimeofakeypadorModel733Wiegand

Interface Module is not affected by this selection. It remains at 5 seconds.

6.11

STRIKE DELAY: 0

Strike Delay

This option displays if DOOR is selected as Device Type.

Enterthenumberofminutes,0to9,todelayadoorstrikeafteravalidcodeisentered

or a card read occurs. When a valid code or card read or code is received, the activation

of the door strike is delayed for the number of minutes programmed. The standard door

strikemessageissenttotheCentralStationreceiverandloggedintheDisplayEventsat

the time of card read or code entry and is not delayed. During this delay, all subsequent

codes entered or cards presented to the reader for a door strike are ignored and no

recordoftheattemptisstored.Enter0(zero)todisable.Defaultis0(zero).

6.12

FIRE EXIT NO YES

Fire Exit Release

Select YES to allow the door access relay at this address to be released whenever

FirepanickeysarepressedoraFireorFireVerifyzonealarmisintheStatusList.

The relay is reset whenever a Sensor Reset is performed to remove all Fire and Fire

VerifyzonealarmsfromtheStatusList.SelectNO to not allow the door access

relay at this address to be released.

6.13

OUT GROUP NO YES

Output Group

Select YEStoallowtheoutputgroup(relays)assignedtotheuserproletoturnON

when the device relay is activated for the programmed strike time. This could be

used to operate an elevator control. Default is NO. See the User Proles section in

theAppendixofthisdocumentformoreinformationaboutproles.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadian XR100