Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 45)

XR100 Series Programming Guide Digital Monitoring Products

Output GrOups

Output Groups

13.1

OUTPUT GROUPS

Output Groups

This function allows you to assign outputs to groups. Output groups can be assigned

tootherareasofprogrammingsuchasOutputOptionsorAlarmActionofZone

Information, just like single outputs are assigned. This allows the entire group of

outputs to turn on and off as required by the programming option.

13.2

GROUP NO: -

Group Number

Enteragroupnumberfrom1to20.Upto20differentgroupsmaybeassigned.

13.3

GROUP NAME X X

Group Name

The group name displays. To change the default name, press any top row Select key

thenenterupto32charactersforthegroupname.PressCOMMANDtoenterthe

outputs to be assigned to the group.

13.4

OUTPUT NO 1: 0

OUTPUT NO 2: 0

OUTPUT NO 4: 0

OUTPUT NO 5: 0

OUTPUT NO 3: 0

OUTPUT NO 7: 0

OUTPUT NO 8: 0

OUTPUT NO 6: 0

Output Number

EntertheOutputnumber.Entryrangeis1to6,450to474,480to499,500to

599(outputs),D1toD8(doors),andG1toG20(groups).Themaximumnumberof

outputsthatcanbeassignedtoaspecicgroupiseight.

An output group may be assigned as one of the output numbers in another output

group.

Example:OutputGroup1consistsofonlyfourassignedoutputs.OutputGroup

1couldbeassignedasoneoutputinOutputGroup2.OutputGroup2couldstill

have7otheroutputsassignedtothatgroup.WhenOutputGroup2isturnedon,11

outputscouldbeturnedon.ThisallowsOutputGroupstobeassignedwithinother

OutputGroupsprovidingmanycombinations.

Outputgroups1to10canbeassignedbyauserproleforapplicationssuchas

elevatorcontrol.SeetheXR500/XR100User’sGuide(LT-0683)OutputGroupsection

for additional information.

Outputgroups11to20cannotbeassignedtoaproleandareavailablefor

installation applications such as special lighting, etc. To assign these groups to a

prole,useRemoteLink™orSystemLink™softwarefromDMP.

Menu Display

14.1

MENU DISPLAY

Menu Display

Menu Display allows you to select at which keypad addresses the user can access

the following functions.

Toselectakeypad,enterthedevicenumber(keypadaddress)usingthedigitkeys

on the keypad. When a keypad is selected, an asterisk appears next to the keypad

address.Enterthenumberagaintodeselectthekeypad.RefertotheMultiple

Displays section at the beginning of this document.

14.2

ARMED STATUS:

Armed Status

1 2 3 4

5 6 7 8

Enterthekeypadaddresses(1through8)thatshowthearmedareas.TheUser

Menu Armed Areas function also displays the custom area name you enter in Area

Information.

14.3

TIME DISPLAY:

Time

Enterthekeypadaddressesthatcandisplaythetimeanddayoftheweek.

14.4

ARM/DIS DISPLAY:

Arm/Disarm

Enterthekeypadaddressesfromwhichuserscanarmanddisarmareas.

Menu Display

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 45

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadian XR100