Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Pobierz pdf (Strona 24)

Digital Monitoring Products XR100 Series Programming Guide

Device Setup

6.1

DEVICE SETUP

Device Setup

ThissectionallowsyoutodenetheXR100Seriespanelphysicalconguration.You

can install and address up to eight supervised devices on the keypad data bus.

6.2

DEVICE NO:-

Device Number

Enterthedevicenumberofthekeypadyouareprogramming.Thevalidrange

is1-8.Ifusingawirelesskeypad,programthedevicenumberintheStatusList

Auxiliary1Zonesprogrammingoptiontodisplaywirelesskeypadtroubles.

Note: Afteryouprogrameachoptionfortherstkeypad,repeatthese

programming steps for each additional keypad.

6.3

* UNUSED *

Device Name

A device name must be given to each device in the system. To add a device

name,pressanySelectkey.Thedefaultdevicename(DEVICEX)displays.Select

COMMAND to accept the default name or press a Select key to enter a new name up

to32alphanumericcharacters.PresstheCOMMANDkey.

To remove a device from the system, delete the device name by pressing any Select

key, then press the COMMAND key. The panel automatically programs the name as *

UNUSED *.

6.4

TYPE: KEYPAD

Device Type

This section allows you to select a device type for the selected device number.

DOOR - The device is an access control device and is either a keypad using door

strike functions or a Wiegand Interface Module.

KEYPAD - The device is a keypad.

FIRE - Thedeviceisa630FRemoteAnnunciator.

EXPANDER - ThedeviceisaZoneExpansionModule.

Note: The following options display based on device type selected:

6.5 Device Communication Type

For a Device Type of DOOR, selectKPD-BUStocommunicatewiththedeviceon

thekeypadbusorselectNETWORKtocommunicatewiththedeviceusinganetwork

connection.DefaultisKPD-BUS.

ForaDeviceTypeofKEYPAD,selectKPD-BUStocommunicatewiththedeviceon

thekeypadbusorselectWIRELESStocommunicatewiththedeviceusingawireless

connection.DefaultisKPD-BUS.

6.6 Wireless

SelectYEStouseawirelesskeypad.SelectNOtouseawiredkeypad.Defaultis

NO. You can install and address up to four wireless keypads.

6.6.1

SERIAL#: XXXXXXXX

Serial Number

Entertheeight-digitserialnumberfoundonthewirelesskeypad.

6.6.2

SUPRVSN TIME: 240

Supervision Time

Press any top row key to select the supervision time required for the device. Press

COMMANDtoacceptthedefaulttime.Defaultis240minutes.

SELECT MINUTES:

0 60 240

Press the Select key under the required number of minutes. The device must check

in at least once during this time or a missing condition is indicated for that device.

Zero(0)indicatesanunsupervisedwirelesskeypad.

Note: When the panel is reset, panel is powered down and powered up, or

programming is complete, the supervision timer restarts for all wireless keypads.

6.7

1 2 3 4

5 6 7 8

ACCESS AREAS:

Access Areas

Press the COMMAND key to program Access Areas. To select an area, enter the area

number using the digit keys on the keypad. When an area is selected, an asterisk

appearsnexttotheareanumber.Enterthenumberagaintodeselectthearea.

Refer to the Multiple Displays section at the beginning of this document.

Usersmusthavematchingaccessareanumbersassignedtotheircodetoreceivea

door access at this device.

DEVICE COMM TYPE

KPD-BUS NETWORK

DEVICE COMM TYPE

KPD-BUS WIRELESS

DEVICE COMM TYPE

KPD-BUS

WIRELESS? NO YES

DOOR KPD FI EXP

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadian XR100 Instrukcja Obsługi Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadian XR100