Digital Monitoring Products Canadain XR500 Instrukcja Obsługi Pobierz pdf (Strona 59)

XR500 Series Programming Guide Digital Monitoring Products

Zone InformatIon

to individual areas and use remote LEDs at the keyswitch. The LED turns on or off to

indicate to the user the armed state of the area(s).

ARM AREAS: PERIM

In an All/Perimeter or Home/Sleep/Away system, this option species the areas to be

armed by the Arming Type zone. For All/Perimeter systems, choose PERIM or ALL, for

Home/Sleep/Away or Home/Away systems, choose HOME, SLEEP, or AWAY.

PERIM ALL

Perimeter/All - Specify whether the arming zone arms just the Perimeter (PERIM) or the

Perimeter and Interior areas (ALL) for All/Perimeter systems. When disarming, all areas

are disarmed.

HOME SLEEP AWAY

Home/Sleep/Away - Specify whether the arming zone arms the Perimeter (HOME), the

Perimeter and Interior (SLEEP), or all three areas (AWAY). When disarming, all areas are

disarmed.

Arming Zone Operation

If any bad zones are present when the Arming zone is shorted, the LED delays lighting

for 5 seconds. If during the 5-second delay the Arming zone is shorted again no arming

takes place. If 5 seconds expire without the zone shorting again or restoring to normal,

the areas arm and bad zones are force armed. To allow bad zones to be force armed,

the Any Bypass option must be set to YES. If Any Bypass option is set to NO, arming does

not occur. See the Area Information - Any Bypass section. A priority zone cannot be force

armed.

19.8

STYLE:

Style

This option species the style for the arming/disarming operation. The default style

is TGL (toggle). Press any Select key to display the STYLE options. To view more style

options press the COMMAND key.

TGL ARM DIS STEP

TGL (Toggle) - When the zone changes from normal to shorted, the programmed areas

toggle between the armed or disarmed condition. When restored to normal, no action

occurs. When the zone opens from a normal (disarmed) state, a trouble is reported.

When opened from a shorted (armed) state, an alarm is reported and the zone is disabled

until you disarm the area(s) from either a keypad or Remote Link.

ARM - When the zone is shorted, the programmed areas are armed. When restored to

normal, no action occurs. When the zone is opened from a normal (disarmed) state, a

trouble is reported. When opened from a shorted (armed) state, an alarm is reported.

DIS (Disarm) - When programmed, a short disarms the programmed areas. When restored

to normal, no action occurs. When the zone is opened from a normal (disarmed) state, a

trouble is reported.

STEP - A short arms the areas and beeps the keypads once. A normal condition causes no

action. An open condition disarms the programmed areas and beep the keypads for one

second.

Note: This arming style is designed for wireless arming pendants. When using an arming/

disarming keyswitch locate the keyswitch within the protected area.

MNT

MNT (Maintain) - When the zone is shorted, the programmed areas are armed. When

restored to normal, the programmed areas are disarmed and any alarm bells are

silenced. When the zone is opened from a normal (disarmed) state, a trouble is reported.

If opened from a shorted (armed) state, an alarm is reported and the zone is disabled

until you disarm the area(s) from either a keypad or Remote Link.

19.9

NEXT ZN? NO YES

Next Zone

Select YES to terminate zone programming. The display returns to Zone Number, allowing

you to enter a new zone number. Select NO to make alter ations to the Alarm Action for a

zone. Alarm Action is dened beginning with section 16.12.

To program zones for wireless operation, select NO at the NEXT ZONE - NO YES option.

The WIRELESS NO YES option displays. If the zone you are programming is intended for

wireless devices, select YES. Select NO to continue programming non-wireless zones in

the 500 to 999 range.

• Zones 400 to 449 can be programmed for 1100 Series Key Fobs.

• Zones 500 to 699 can be programmed for FA Series Wireless.

• Zones 500 through 999 can be programmed for DMP 1100 Series Wireless.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Canadain XR500 Instrukcja Obsługi Strona 59

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Canadain XR500