Digital Monitoring Products 1912XR Przewodnik Instalacji Pobierz pdf (Strona 7)

Digital Monitoring Products, Inc.

1912XR Programming

Page 1

1-INTRODUCTION

Introduction

1.1 Before You Begin

About this Manual

This manual provides programming information for the DMP 1912XR Command Processor panel.

After this Introduction, the remaining sections describe the functions of each programming menu

item along with the available options. The 1912XR contains all of its programming information in an

on board processor and does not require an external programmer. After resetting the panel from

jumper J16, you can perform all programming tasks through any DMP alphanumeric keypad

connected to the system.

Reading the Contents

Before starting to program, we recommend you read through the contents of this manual. The

information contained here allows you to quickly learn the programming options and operational

capabilities of the 1912XR panel.

In addition to this manual, you should also read and be familiar with the following 1912XR

documents:

• 1912XR Installation Guide (LT-0169)

• 1912XR Product Specification (LT-0170)

• 1912XR Security Command

User's Guide (LT-0172)

Programming Information Sheet

Included with each 1912XR panel are the Programming Information Sheets. These list the various

keypad prompts and available options for programming the panel. Before starting, we recommend

you completely fill out each sheet with the programming options you intend to enter into the panel.

Having completed programming sheets available while entering data helps to prevent errors and can

shorten the length of time you spend programming. Completed sheets also provide you with an

accurate account of the panel's program you can keep on file for future system service or expansion.

The remainder of this Introduction provides instructions for starting and ending a 1912XR

programming session using the alphanumeric keypad.

1.2 Getting Started

The 1912XR Command Processor panel and all loop expansion devices must be completely

installed before you begin programming. Make sure the panel is properly grounded. Connect AC

power and a battery to the appropriate panel terminals.

Initializing the Panel

When programming a 1912XR panel for the first time, or changing the program of an existing

1912XR, we reccomend you use the Initialization function. See section 2. Initializing the panel

clears previously programmed information from the panel's memory.

Program from any Keypad Address

All 1912XR programming is done through keypads correctly addressed and connected to the

system. See the 1912XR Installation Guide (LT-0169) for keypad addressing and installation

information. If you're programming a panel that does not have a keypad, you can temporarily use an

alphanumeric keypad set to address zero (all switches down). While programming with a keypad set

to address zero, you cannot program from any other address.

Select address zero by placing all switches on the switchblock inside the keypad to the down

position.

1 2 3 4 5 6 7 8 9 10 11 12 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products 1912XR Przewodnik Instalacji Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products 1912XR