Digital Monitoring Products 1912XR Przewodnik Instalacji Pobierz pdf (Strona 23)

Digital Monitoring Products, Inc.

1912XR Programming

Page 17

8.5C COMMUNICATION FAILURE OUTPUT - This output is turned on when any of

the following conditions occur:

• a DD system fails to communicate on three successive dial attempts

• a MPX system does not communicate with the receiver for 150 seconds or if

the backup communication module transmits a report

Enter zero to disable this output.

8.5D FIRE ALARM OUTPUT - This output is turned on any time a fire type loop is

placed in alarm. The output is turned off using the Sensor Reset option while no

additional fire type loops are in alarm. Enter zero to disable this output.

8.5E FIRE TROUBLE OUTPUT - This output is turned on any time a fire type loop is

placed in trouble or when a supervisory type loop is placed in alarm or trouble.

The output is turned off when all fire and supervisory type loops are restored to

normal. Enter zero to disable this output.

8.5F AMBUSH OUTPUT - This output is turned on any time an Ambush code is

entered at a keypad. The output is turned off using the Sensor Reset option.

Enter zero to disable this output.

8.5G ENTRY OUTPUT - This output is turned on at the start of the entry delay time.

The output is turned off when the area is disarmed or the entry delay time

expires. Enter zero to disable this output.

8.5H EXIT OUTPUT - This output is turned on any time an exit delay time starts in any

area of the system. The output is turned off when the area arms or when the

arming has been stopped. Enter zero to disable this output.

8.5I READY OUTPUT - This output is turned on whenever all disarmed burglary loop

types are in a normal state. The output is turned off when any disarmed burglary

type loop is in a bad state. Enter zero to disable this output.

8.5J PHONE TROUBLE OUTPUT - This output is turned on any time the phone line

monitor detects a voltage below 3 VDC. The output is turned off when phone

voltage rises above 3 VDC. Enter zero to disable this output.

8.5K LATE TO CLOSE OUTPUT - This output is turned on any time a programmed

area in a closed period remains disarmed. The output is turned off when the area

is armed, the closing is extended, or the schedule is changed.

8.5L DEVICE FAIL OUTPUT - This output is turned on any time an addressed device

fails to respond to polling from the panel. The output is turned off when the

device responds to polling or is removed from the system. Enter zero to disable

this output.

Any Output Option can be used with output numbers 1 through 6 and 100 through 199.

FIRE ALR OUT: 0

AMBUSH OUT: 0

ENTRY OUT: 0

READY OUT: 0

FIRE TRB OUT: 0

LATE CLS OUT: 0

PH TRBL OUT: 0

EXIT OUT: 0

COM FAIL OUT: 0

DVC FAIL OUT: 0

8-OUTPUT OPTIONS

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products 1912XR Przewodnik Instalacji Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products 1912XR