Digital Monitoring Products Graphic Touchscreen Podręcznik Użytkownika Pobierz pdf (Strona 35)

28 XR150/XR350/XR550 User’s Guide User Menu

Using the Bypass Zones Function

1. Access the User Menu.

2. PressCOMMANDuntilBYPASSZONES?displays.

3. Press any Select key. The keypad displays

ZONE:-RSTBYPS.

4. ToBypassazone,enterthezonenumberandselectBYPS.

Thezonenumberautomaticallydisappearsandanewzone

number can be entered. Refer back to step 3.

5. ToResetazone,enterthezonenumberandselectRST.

Browser Feature

If you are unsure of the zone number or description, refer to

Appendix B at the back of this guide for a diagram showing you

how to use the built-in Bypass Zones browser.

Zone Monitor

Allows the system to monitor selected disarmed zones (doors,

windows, or motion detectors) and display their name at the

keypad as they are faulted. This feature could be used to monitor

an access door.

Zone Monitor works with any disarmed zone and also sounds the

keypadmonitortonewhenthezonefaults.Thezonenamedisplays

at all keypads designated for the area in your system.

YoucanplaceanycombinationofdisarmedzonesinZoneMonitor

butonlythemostrecentzonefaulteddisplays.Thedisplayedzone

nameclearsautomaticallyafterashorttimeorwhenthezoneis

armed.

Monitor (Chime) Shortcut Key

All Systems — Press 5 for 2 seconds when the system is disarmed.

Thisinitiates the Zone Monitor operation forall Exit zones in an

Area system or all zones assigned to the perimeter in a Home/

Sleep/Away, Home/Sleep/Away with Guest, or All/Perimeter

system.Thekeypad displays MONITORONandchimes or displays

MONITOROFFandnotoneissounded.

Testing your system’s burglary protection

After using the System Test function, place all zones in Zone

Monitor. Starting at the front door, go around and open and then

close each door and window. You should hear the keypad beep

eachtime.Thekeypadalsodisplaysthenameofeachzoneasits

device is opened.

Oncethe protected doors and windows test is complete, walkin

frontofeachmotiondetector.Thekeypadshouldbeeptoconrm

the zone has tripped. If at any time during your weekly testing

a device does not cause the keypad to beep, call the service

department for assistance.

Using the Zone Monitor Function

1. Access the User Menu.

2. PressCOMMANDuntilZONEMONITOR?displays.

3. Press any Select key. The keypad displays ALL NBR or

PERIM ALL NBR.

4. Select PERIM to place all disarmed perimeter zones into

Zone Monitor.

4a. The keypad displays ALL? ADD RMV.

4b. SelectADDtoaddalldisarmedzonestoZoneMonitor.

4c. SelectRMVtoremovealldisarmedzones.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Graphic Touchscreen Podręcznik Użytkownika Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Graphic Touchscreen