Digital Monitoring Products XR20 Przewodnik Instalacji Pobierz pdf (Strona 36)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

zone informaTion

11.9

WIRELESS NO YES

Wireless

Select YES to program this zone as a DMP wireless zone. You must program the

wireless House Code prior to adding wireless zones to the system. See House code

programming in System Options. Default is NO.

11.9.1

SERIAL #: -

Serial Number Entry

Enter the eight digit serial number, including leading zeros, found on the wireless

device.

ALREADY USED Zxx

Displays when the serial number is already programmed for another zone. The

programmed zone number displays.

11.9.2

CONTACT: INTERNAL

Contact

This option displays if the serial number entered is for an 1101 or 1103 Universal

Transmitter or 1114 Wireless Four-Zone Expander. Press any top row key to select

the contact.

INT EXT

This option displays when programming an 1101 Transmitter. Select INT to use the

internal reed switch contacts. Select EXT to connect an external device to the 1101

terminal block. Default is INTERNAL.

By allowing both of the Model 1101 transmitter contacts (INT and EXT) to be used at

the same time, two zones may be programmed from one transmitter. When using

both contacts, you must use consecutive zone numbers.

For example, program transmitter serial number 01345678 as Zone 11 with an INT

contact type and Zone 12 with an EXT contact type. The same serial number is used

for both zones.

CONTACT: x

This option displays when programming an 1114 zone expander which provides four

input contacts. Press any top row key to select the contact. Default is Contact 1.

1 2 3 4

Select the contact number to program. The same transmitter serial number is used

for all four contacts. When using the contacts, you must use consecutive zone

numbers.

For example, use serial number 08345678 to program Contact 1 for Zone 21,

Contact 2 for Zone 22, Contact 3 for zone 23, and Contact 4 for zone 24.

A tamper on the 1114 is transmitted as the zone number assigned to Contact 1.

ALREADY USED Zxx

This message displays when the Contact is already programmed for another zone.

The programmed zone number displays.

NORM OPEN NO YES

The Normally Open option only displays when EXT is selected as the Contact

type. For external devices connected to the 1101 terminal block, select NO to use

normally closed (N/C) contacts. Select YES to use normally open (N/O) contacts.

Default is NO.

Note: For listed installations, set Normally Open to NO.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products XR20 Przewodnik Instalacji Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products XR20