Digital Monitoring Products Graphic Touchscreen Podręcznik Użytkownika Pobierz pdf (Strona 38)

34 XT30/XT50 User Guide System Setup

3. Press any Select key.

The keypad displays ADD DEL CHG BAT.

4. Select ADD to add a new user code.

5. At the USER NUMBER: — prompt, enter a user number and

press COMMAND.

6. The displays changes to CODE NO:. Enter the four-digit user

code and press COMMAND.

This is the number the user enters each time they arm,

disarm, or make changes to the system.

If the code you entered is already in use, or is a code used

internally by the system, the keypad displays ALREADY IN

USE. You must enter a different 4-digit user code.

7. A 16-character name may be entered to identify the user.

Press any top row key to clear the current text “user name”.

You may then enter the new name. After entering the name

press COMMAND. See Entering Names in Appendix C.

FOR XT30 Panels:

8. The display changes to MASTER? NO YES. Select YES to make

this a Master user level with the authority to access all User

Menu functions.

Select NO to make this a Standard user level. Default is set to

NO. Proceed to step 10a.

FOR XT50 Panels:

8. The display changes to LEVEL: STANDARD

9. Press any Select key. The keypad displays

SCH LTD STD MSTR.

10. Select the authority level to assign to the user code.

The following user code options can then be selected:

10a. TEMP CODE NO YES.

Select NO to make this a permanent user code.

Select YES to make this a temporary code. The keypad

displays TEMP DAYS: - . Enter the number of days (1 to

250) that the temporary use code can operate. Default is

seven days. Temporary users are deleted from the system

at 12:00 AM on the last day. You can delete a Temporary

user code at any time before the programmed period ends.

10b. AREAS: (Displays in Area systems only).

Enter the area numbers where this user is to have access.

For example: if you want this user to only have access to

areas 1 and 2, enter the numbers 1 and 2.

Once the correct area numbers display, press COMMAND.

10c. ARM ONLY NO YES.

Select NO to allow this user to arm and disarm the system

and access all Standard level functions in the User Menu.

Select YES to restrict this user to arming only.

The Arm Only user code can bypass zones not in a normal

condition at the time of arming.

11. After you complete your selections, the keypad displays USER

# ADDED.

12. Press the Back Arrow key once to add another user or twice

to exit the User Menu.

Changing Own User Code

1. Access the User Menu.

2. Press the COMMAND key until USER CODES? displays. Press any

Select key.

3. The display changes to USER CODE? CODE NO: ******.

Press any Select key.

The user code is erased and display changes to CODE NO: -

Type your new user code. Press Command.

5.DisplaywillshowUSERXXXXCHNGDtoconrmthechange.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products Graphic Touchscreen Podręcznik Użytkownika Strona 38

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products Graphic Touchscreen