Digital Monitoring Products XR550 Instrukcja Obsługi Pobierz pdf (Strona 72)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

APPENDIX

PN (Panic zone)

Used for connecting to mechanical devices that allow a user to signal an emergency alarm. Panic zones can

provide either a silent or audible alarm with or without reporting to a central station receiver.

EM (Emergency zone)

These are used for reporting medical or other non-panic emergencies to the central station receiver.

SV (Supervisory zone)

Used to provide 24-hour zone supervision to devices associated with re systems. Typical applications are

tamper switches on Post Indicator Valves (PIVs), gate valves, and low and high temperature gauges.

FI (Fire zone)

Used for any type of powered or mechanical re detection device. Typical applications are for smoke

detectors, sprinkler owswitches, manual pull stations, and beam detectors. Retard, cross zoning, and

presignal options are available for the Fire zone type.

FV (Fire Verify zone)

Used primarily for smoke detector circuits to verify the existence of an actual re condition. When a Fire

Verify zone initiates an alarm, the panel performs a Fire Reset. If any Fire Verify zone initiates an alarm

within 120 seconds after the reset, an alarm is indicated. If an alarm is initiated after 120 seconds, the cycle

repeats.

A1 and A2 (Auxiliary 1 and Auxiliary 2)

These zones are similar to a Night zone and are typically used to protect restricted areas within a protected

premises.

AR (Arming zone)

This zone allows you to connect a keyswitch to a zone and use it to arm and disarm one or more areas.

22.12 ZoneTypeSpecications

The panel contains multiple default zone types for use in conguring the system. These zone types provide

the most commonly selected functions for their applications. All zone types can be customized by changing

the variable options listed below. The Keypad Bus Zone Information table below reects the zone types for

Keypad Bus Zones. The LX-Bus Zone Information table on the next page reects the zone types for LX-Bus

Zones.

Keypad Bus Zone

Information

Type Area Fire

Bell

Disarmed

Open

Disarmed

Short

Armed

Open

Armed

Short

Swinger

Prewarn

Entry Delay

Retard Delay

Presignal

Fast Response

Cross Zone

Priority

Follow Area

Real-Time Rprts

Door Number

Style

Assign Disarm condition of

NT, DY, EX, A1, and A2 only

Assign Prewarn and Entry

Delay for EX only

Assign Retard and Presignal

for FI, SV, A1, and A2 only

Zone Type Defaults

INT

PERIM

BDRM

Output *

Message

Output *

Action

Message

Output *

Action

Message

Output *

Action

Message

Output *

Action

TGL

ARM

DIS

STEP

MNT

Night NT - 0 S - 0 S A 0 S A 0 S Y N N N 0 N 0

Day DY T 0 S T 0 S A 0 S A 0 S Y N N N 0 N 0

Exit EX - 0 S - 0 S A 0 S A 0 S Y

1-16

1 N N N N 0

Fire FI 0 T 0 S A 0 S N N + N N N

Panic PN T 0 S A 0 S N N N N

Emergency EM T 0 S A 0 S N N N N

Supervisory SV 0 T 0 S A 0 S N N + N N N

Auxiliary 1 A1 T 0 S A 0 S T 0 S A 0 S N N + N N N 0 N 0

Auxiliary 2 A2 T 0 S A 0 S T 0 S A 0 S N N + N N N 0 N 0

Fire Verify FV 0 T 0 S A 0 S N N N

Arming AR TGL

*Output Options: 1 to 6, 450 to 474, 480 to 499, 500 to 999, D1 to D16, F1 to F20, G1 to G20. + = Set retard to YES before selecting presignal. = Zone functions not available.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Monitoring Products XR550 Instrukcja Obsługi Strona 72

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Monitoring Products XR550