
Introduction
XRSuper6/XR20/XR40 Installation Guide
1
2500 N. Partnership Boulevard Springfield, MO 65803 www.dmpnet.com Digital Monitoring Products
Panel Specifications
1.1 Power supply
Transformer Input: 16.5 VAC 40VA (Models 320 wire-in or 321 plug-in)
16.5 VAC 20VA (Model 324 plug-in)
Standby Battery: 12 VDC 7.0Ah (40VA transformer charges up to 2 batteries)
Auxiliary Output: 12 VDC at 500mA
Bell Output: 12 VDC at 1.5 Amps with 40VA transformer, 600mA with 20VA transformer
Smoke Detector Output: 12 VDC at 100mA
All circuits inherent power limited
1.2 Communication
Built-in SDLC Digital Dialer communication to DMP Model SCS-1 Receivers
Built-in 4-2 communication to non-DMP receivers
Built-in M2E (Radionics Modem IIe) communication to non-DMP receivers (XRSuper6/XR20/XR40 only)
Built-in CID (Contact ID) communication to non-DMP receivers
Any panel can operate as a local system.
1.3 Panel zones
Nine 1k Ω EOL burglary zones (zones 1 to 9), (zones 1 to 5 on XRSuper6)
One 3.3k Ω EOL Class B powered fire zone with reset capability (zone 6 on XRSuper6; zone 10 on, XR20, and XR40)
1.4 Keypads
You can connect up to four supervised keypads to the XRSuper6/XR20 panels and eight supervised keypads on
the XR40.
• 16 or 32 character alphanumeric keypads
• 10-zone LED keypads
In addition, the following zone expanders can be added to the XRSuper6/XR20/XR40 panels:
• Four and single point zone expanders
• Single point PIR and glassbreak detectors
• One 738A Ademco Wireless interface for up to 32 points of zone expansion
• One FA426 Wireless receiver for up to 16 points of zone expansion (Two on the XR40)
When using the FA426 Wireless Receiver, the XRSuper6/XR20 allows unsupervised devices to be added to
address five.
1.5 Outputs
The XRSuper6/XR20/XR40 panels provide four open collector outputs rated for 50mA each. A Model 300 Output
Harness is required. The open collector outputs provide the ground connection for a positive voltage source.
1.6 Enclosure specifications
The XRSuper6/XR20/XR40 panel ships in an enclosure with EOL resistors, battery leads, user's guide, and
programming sheet.
Size: 12.5" W x 11.5" H x 3.5" D
Weight: 4 lbs
Color: Gray
Construction: 20 gauge cold rolled steel
Komentarze do niniejszej Instrukcji